field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

TE Connectivity's Manufacturing and Process Development Engineering Teams significantly impact LEANPD driven new product development projects, driving for excellence in existing manufacturing technologies and methods and striving to implement new manufacturing technologies to provide improved process and tolerance control. They act as the binding element between product development and manufacturing engineering, ensuring the effectiveness and efficiency of this critical interface. They support Product Development in the optimization of designs and piece parts for manufacturability by realizing sample tooling/products/prototypes. They also design, develop, and qualify tooling and processes to meet TE quality and production standards, document all processes and tooling in applicable TE systems, support supply chain to verify supplier compliance and capability, initiate and implement programs to continuously improve quality, cost and cycle time and adhere to all appropriate specifications, regulatory requirements and customer requirements. Main responsibilities <ul> <li>Process Optimization: Identify, analyze, and improve manufacturing processes to reduce waste, enhance productivity, and improve product quality using lean principles and Six Sigma methodologies.</li> <li>SAP Support: Utilize SAP and troubleshoot issues within the manufacturing environment.</li> <li>Continuous Improvement: Lead and participate in continuous improvement initiatives, recommending changes and implementing solutions based on data-driven insights.</li> <li>Cost Analysis: Provide initial product manufacturing cost estimates &amp; quotes. Reviewing historical manufacturing cost after selected landing zone and tool offers.</li> <li>Investments: ROI on Capex investments initiated by manufacturing engineering team. Provide CER's for required Invests when support is required.</li> </ul> What your background should look like <ul> <li>Master degree in mechanical/mechatronics or similar engineering</li> <li>3+ years of experience in Mechanical engineering industry, manufacturing process setup &amp; improvements.</li> <li>Proficient Office user, especially for use of Excel templates</li> <li>Strong communication, organizational, and interpersonal skills</li> <li>Strong problem-solving ability&gt; </li><li>Organizing and Prioritization</li> </ul> Nice to have: <ul> <li>Shopfloor knowledge and hands on experience, preferably in stamping &amp; forming toolparts manufacturing</li> <li>Understanding of core processes like Stamping, Plating, Molding &amp; Assembly</li> <li>Knowledge in electro-mechanical product designs (Identification, Terminal Block, Distribution Block and Connectors)</li> <li>Mechanical Design of electro-mechanical products knowledge.</li> <li>Broad knowledge in all kinds of manufacturing technologies</li> <li>Broad knowledge in Rapid Prototyping methods</li> </ul> Job Locations: HASTINGS, East Sussex TN38 9RF United Kingdom Travel Required: 10% to 25%

Industrial Engineer

PSI designs, manufactures and installs capital equipment from small R&amp;D systems up to high throughput turnkey production plant. Our sister company MPP uses PSI's gas atomisation systems in the production and development of high performance, high purity spherical metal powders. 80% of our products are exported to international customers. In this role, you will be responsible for generating comprehensive technical and commercial proposals for gas atomisers. The position requires a good level of understanding and experience in engineering principles and practices and mathematical competency. Our customer purchasing teams contained skilled engineers so conversation at high a engineering level is essential. You will be supported by, and form part of, a team with good commercial awareness of the customers financial and commercial objectives to facilitate the rapid generation of high-quality proposals. Main Responsibilities &amp; Duties: <ul> <li>Developing comprehensive cost estimates for projects, encompassing materials, labour, equipment, and potential subcontractors.</li> <li>Liaising with clients to understand their needs, addressing queries, and participating in meetings to build strong relationships.</li> <li>Creating compelling and well-structured technical and commercial proposals that clearly outline project scope, deliverables, and costings linked to the value proposition in response to client requests.</li> <li>Identifying potential risks, evaluating their commercial implications, and contributing to risk registers and mitigation strategies.</li> <li>Working closely with internal departments, operations, engineering and procurement, to gather information and ensure a cohesive approach to proposals.</li> <li>Validating profit margins and ensuring that project costs are balanced against time and quality requirements for optimal financial outcomes.</li> </ul> Desired Qualifications &amp; Experience: <ul> <li>Possession of an accredited university degree or equivalent qualification in an Engineering discipline</li> <li>Strong technical aptitude and problem-solving skills</li> <li>Excellent written communication skills</li> <li>Proficiency in Microsoft Office suite (Word, Excel, PowerPoint)</li> <li>Experience with engineering design software (e.g. AutoCAD, SolidWorks)</li> <li>Knowledge of industry standards and regulations</li> <li>Previous experience in a technical sales or engineering role</li> </ul> Essentials: Full UK Driving Licence and ability to travel globally as required Working Hours: 37.5 hour working week Holiday entitlement: 22 days (Plus, Bank holidays) Location: Hailsham, East Sussex

Proposals & Costing Engineer

Field Service Engineer £35,000 - £40,000 (OTE £50,000) Overtime + Training + Progression + Excellent Benefits Field Based (Commutable from Laughton, Lewes, Brighton, Eastbourne, surrounding areas) Are you a mechanical/electrical engineer looking for a varied role within a leading Instrument manufacturer, offering full OEM training and international travel opportunities? This is an excellent opportunity to work on a technically advanced range of electro mechanical equipment, providing installation, maintenance and repair services to customers across the UK and abroad. You'll receive full product training, continual professional development and long term career progression within a global, well established organisation. This industry leading company have been designing and manufacturing high quality scientific instruments for over 40 years. Supplying equipment to research institutions and industrial laboratories worldwide, they have built a reputation for innovation, reliability and customer service excellence. This role would suit an electrically or mechanically skilled engineer with good hands on experience in servicing or maintaining technical equipment, looking to develop their skills in a highly specialised and growing industry. The Role <ul> <li>Install, service and repair scientific instruments across the UK and internationally</li> <li>Diagnose and repair faults to agreed turnaround times</li> <li>Monday - Friday, days based role with some UK and international travel</li> </ul> The Person <ul> <li>Proven hands on experience with mechanical/electrical systems</li> <li>Confident using hand tools, multimeters and test equipment</li> <li>Full UK Driving Licence and valid Passport</li> </ul> Reference Number: 266491 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Alex Marks at Rise Technical Recruitment Rise Technical Recruitment acts as an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.

Field Service Engineer

A leading technical recruitment agency seeks a Field Service Engineer to install, service, and repair scientific instruments across the UK and internationally. Ideal candidates are mechanically or electrically skilled engineers with hands-on experience in servicing technical equipment. The role offers excellent benefits, full training, and opportunities for career progression within a reputable company that has been a leader in the industry for over 40 years.

Field Service Engineer - Global Travel, Training & Growth

A global consulting firm is looking for a recent graduate for the role of Graduate Geotechnical Engineer in Hastings. In this role, you'll be involved in various projects including wastewater treatment solutions. You'll assist with site inspections, produce geotechnical reports, and engage in environmental design. The position offers a supportive work environment, opportunities for growth, and an attractive salary package.

Graduate Geotechnical Engineer: Design, Field & Growth

Graduate Geotechnical Engineer - Hastings Are you a recent graduate (or expecting to complete your studies in 2026) with a relevant Geotechnical Engineering Qualification (BE Civil or similar) and aspirations to develop and grow in a collaborative and supportive environment, then join Stantec's Graduate Programme! We are a reputable global consulting firm and provide plenty of opportunities for aspiring and upcoming engineering professionals to work on a wide range of exciting projects. Fantastic perks we provide: <ul> <li>Engineering NZ accredited 2-year graduate development programme.</li> <li>Up to NZD 69,000 base salary with company benefits on top such as insurances, spot bonuses banking discounts etc.</li> <li>You will be connected to our international Young Professionals Group Network with opportunities for training and networking across New Zealand and Australia.</li> <li>You will be supported through your Engineering New Zealand Accreditation and mentored for your own personal career development.</li> <li>Possibility to travel overseas via a developing professional's exchange</li> <li>Flexible working environments and excellent employee benefits</li> </ul> What do our Graduate Geotechnical Engineers do? Our Hastings based Graduate Geotechnical Engineer will be a vital contributor to a range of projects delivering improved outcomes for our community including essential cyclone recovery works. The Hastings Wastewater Treatment Plant is an example-collaborative design and effective engagement with local tangata whenua created a solution that was environmentally friendly and cost-effective. The unique configuration of treatment processes for the no sludge solution led to a sustainability award for the team. Our commitment to sustainability shines through in all we do, and we aim to support the environment through our charitable and volunteer efforts too. It's all part of preserving the beautiful backdrop that we enjoy ourselves-whether it be hiking, mountain biking, fishing, swimming or surfing. Day to day tasks would involve: <ul> <li>Working alongside other junior, intermediate and senior geotechnical staff.</li> <li>Assisting with site inspections, field investigations and construction supervision.</li> <li>Producing ground models and geotechnical reports.</li> <li>Geotechnical design and analysis including foundation designs, retaining wall designs, slope assessments etc.</li> <li>Delivering geotechnical project inputs to the agreed outputs on budget, on time and to agreed quality standards.</li> </ul> What you will bring You'll be as committed as we are to improving the communities, we live in. We're seeking individuals who thrive on thinking outside the box. Your ability to come up with fresh ideas and contribute to practical design solutions will be invaluable. You will have a Qualification in Civil Engineering, Geotechnical Engineering or Engineering Geology with a passion for transportation and infrastructure design. <ul> <li>To be eligible to apply you must:</li> <li>Be a recent graduate or due to complete your studies in 2026.</li> <li>Have a full clean current driving licence.</li> <li>Working Rights: Student Visa (convertible to post study open work visa), Permanent Resident, Citizen.</li> </ul> Application Advice and Tips <ul> <li>Refer to our CV and Cover Letter advice on Prosple.</li> <li>We will let you know once this opportunity opens!</li> </ul> About Stantec The Stantec community unites approximately 28,000 employees working in over 400 locations across six continents. We collaborate across disciplines and industries to bring water, transport and infrastructure projects to life. Our work from initial project concept and planning through design, construction and commissioning is built on a nearly 200-year history. So, when we take on a project, we see the opportunity to make a lasting connection with the people and places where we live and work.

Graduate Geotechnical Engineer - Transport or Water (Feb 2027)

As a Senior Manufacturing Engineer - PCA, your mission is to own the manufacturing system within the PCA manufacturing cells by the maintenance and continuous improvement of the safe and LEAN processes for existing and new products to ensure operations on time to standard and within budget within the PCA cell. You will report to our Manufacturing Engineering Manager - PCA. You will: <ul> <li>Support the existing products within the cells</li> <li>Provide manufacturing engineering support to the manufacturing operational team where needed.</li> <li>Lead continuous improvement activities through lean techniques and value engineering to enhance the capability of existing processes and waste reduction.</li> <li>Creation and maintenance of Standard Operating Procedures, technical specifications for manufacturing equipment.</li> <li>Active training process, procedures, documentation, and traceability to create and sustain the workforce competences within the allocated manufacturing cells.</li> <li>Implement and maintain suitable metrics to demonstrate the effectiveness of the Manufacturing process in the allocated cells.</li> <li>Design, prove, implement, and maintain Cell manufacturing system layout.</li> <li>Work with other departments and suppliers to support all the quality issues on components and products in PCA.</li> <li>Active member of the manufacturing cells Visual Management setup.</li> <li>Integrate new products into existing cell and agree standards for acceptance into the production Cell.</li> <li>Document and trace processes for the allocated manufacturing Cell in compliance to our current regulations in terms of ISO 9001, 14001 and OHSAS18001.</li> <li>Support internal and external quality management and audits where required.</li> <li>Preventative analysis and corrective actions for safety incidents within the allocated manufacturing cell via Risk analysis techniques.</li> <li>Preventative analysis of production quality incidents within the allocated manufacturing cell via FMEA.</li> <li>Capital equipment specification, procurement and commissioning.</li> <li>Process definition, specification and documentation.</li> </ul> General accountabilities <ul> <li>Ownership and accountability to resolve or support any non-conformity, internal or external, impacting the manufacturing process of the allocated cells utilising 8D/RCA techniques.</li> <li>Accountable for the definition, setup, and optimization of the processes within the allocated manufacturing cells.</li> <li>Accountable for the accuracy of manufacturing technical data, for example: product routings and Standard Operation Procedures 's, within the allocated manufacturing cells.</li> <li>Responsible for the compliance of the production processes to current regulations in terms of Health, Safety and Environment.</li> <li>Perform cut in investigation for the Engineering Change implementation process and ownership of the consequential phase out/in process for the involved parts and products.</li> <li>Lead Total Preventative Maintenance processes and activities.</li> </ul> Further information <ul> <li>Responsibility of up to 2 manufacturing zones</li> <li>Support cell(s) KPI's</li> <li>Support Product Company continues improvement objectives and KPI's</li> <li>Drive improvements in cell(s) performance</li> <li>Support introduction of NPI projects</li> </ul> Skills and knowledge must have <ul> <li>PCA Assembly Processes</li> <li>Minimum 5 years experience in surface mount and through hole application</li> <li>Working Knowlege of MS Office - Word/Excel/Sharepoint/TEAMs</li> <li>Good interpersonal and team working skills in manufacturing environment</li> <li>Confident with working on own initiative</li> <li>High energy and motivation levels</li> <li>Ability to interpret and review PCB/PCA CAD data drawings or packages</li> <li>Strong analytical, presentational and commercial skills</li> <li>Strong communicating skills (English verbal &amp; written)</li> <li>Excellent time management skills</li> <li>Working knowlege of implementing Lean manufacturing techniques</li> <li>Experience within an ERP system</li> <li>DFMEA + PFMEA</li> <li>Project management experience including implementation of complex and technically challenging projects</li> <li>Experience of utilising problem solving and root cause analysis tools as in a manufacturing environment</li> <li>Use of risk mitigation tools to control risks within processs and prioritise risk to be mitigated</li> </ul> Skills and knowledge desirable <ul> <li>SAP ERP specific knowledge</li> </ul> Qualification/Education/Certification <ul> <li>Degree in Electronics/Mechanical/Manufacturing Engineering subject or equivalent experience.</li> <li>HNC/D NVQ level 4 in Electronis/Mechanical/Manufacturing Engineering subject with additional relevant experience.</li> </ul> We encourage you to apply even if you don't meet every single requirement. We value diverse experiences and perspectives and are excited to see what you bring to the role. In return, we offer <ul> <li>Culture of trust and accountability</li> <li>Lifelong learning and career growth</li> <li>Innovation powered by people</li> <li>Comprehensive compensation and benefits</li> <li>Health and well-being</li> </ul> Job location On-Site This role requires you to work on-site at our office in Eastbourne UK, United Kingdom (GB). You will be part of a dynamic team and enjoy the benefits of face-to-face collaboration. Contact information Talent Acquisition Team: Dominique Whitefoot Uniting curious minds Behind every innovative solution, there are people working together to transform the future. With careers sparked by initiative and lifelong learning, we unite curious minds, and you could be one of them. Take the next step. Apply for the role today.

Senior Manufacturing Engineer - PCA

Field Service Engineer 35,000 - 40,000 (OTE 50,000) Overtime + Training + Progression + Excellent Benefits Field Based (Commutable from Laughton, Lewes, Brighton, Eastbourne, surrounding areas) Are you a mechanical/electrical engineer looking for a varied role within a leading Instrument manufacturer, offering full OEM training and international travel opportunities? This is an excellent opportunity to work on a technically advanced range of electro-mechanical equipment, providing installation, maintenance and repair services to customers across the UK and abroad. You'll receive full product training, continual professional development and long-term career progression within a global, well-established organisation. This industry-leading company have been designing and manufacturing high-quality scientific instruments for over 40 years. Supplying equipment to research institutions and industrial laboratories worldwide, they have built a reputation for innovation, reliability and customer service excellence. This role would suit an electrically or mechanically skilled engineer with good hands-on experience in servicing or maintaining technical equipment, looking to develop their skills in a highly specialised and growing industry. The Role:<ul><li>Install, service and repair scientific instruments across the UK and internationally</li><li>Diagnose and repair faults to agreed turnaround times</li><li>Monday - Friday, days-based role with some UK and international travel</li></ul> The Person:<ul><li>Proven hands-on experience with mechanical/electrical systems</li><li>Confident using hand tools, multimeters and test equipment</li><li>Full UK Driving Licence and valid Passport</li></ul> Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Alex Marks at Rise Technical Recruitment Rise Technical Recruitment acts as an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates

What Are We Looking For? Due to continued growth, WES, part of the RSE Group, is looking for a Mechanical Fitter to assist with the successful delivery of installation projects within the Water industry. Please note there is travel and working away from home required as part of this role with accommodation provided by WES. Some of Your Key Duties Include: <ul> <li>Installation of new and existing mechanical equipment including kiosk, chemical dosing rigs, and plastic pipework.</li> <li>Undertake maintenance/repair work in existing pipework systems and various other mechanical components such as pump changes and valve replacements.</li> <li>Lay out, assemble, fabricate, maintain, troubleshoot and repair piping systems carrying water, steam, chemicals and fuel in heating, cooling, lubricating and other process piping systems.</li> <li>Assist other disciplines when required.</li> <li>Carry out all other tasks as requested within the post holder s appropriate skill set.</li> </ul> What Do You Need? <ul> <li>NVQ or Apprenticeship in Mechanical Engineering, Pipefitting or equivalent.</li> <li>Proven Mechanical installation experience specifically working with plastics.</li> <li>Good knowledge of Quality, Environmental and Health &amp; Safety processes/procedures.</li> <li>Water industry experience would be highly advantageous however other industries will also be considered.</li> <li>Full UK Driving Licence</li> </ul> WES - Who Are We? WES is one of the leading suppliers of specialist Chemical Dosing systems in the UK. Simply put, we do it all. Our service offering includes design, manufacture, and installation of innovative chemical dosing solutions for the UK water industry and industrial manufacturing markets. Our nationwide coverage means WES is well placed to offer integrated solutions and support services across the UK. Uniquely, chemical dosing is not a division of WES, it is WES. We believe this gives us cutting edge advantage in the marketplace, and our people are at the forefront of our innovation. WES is part of the RSE group of companies, offering us a unique advantage in the marketplace. RSE is the leading partner of choice in the design, build &amp; maintenance of water treatment &amp; water recycling equipment. Delivering products and services to clients across the UK, RSE s offering to the market focuses on innovation, efficiency, and excellence. RSE Who Are We? Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now.

Mechanical Fitter

Associate Director Structural Engineer East Sussex, TN6 Up to 60k + bonus Do you enjoy a using a cost effective approach to creating collaborative structural solutions? Would you like to join a well established multi disciplinary team to develop and grow your career? If you are an individual with significant experience of buildings design experience who would enjoy working in a small practice in East Sussex and have your own car, then this could be for you. This reputable design consultancy are seeking to expand their structural division. You should ideally be MICE or MIStructE qualified. Projects are very varied, ranging from small residential projects to commercial buildings schemes. You will be dealing directly with clients and other professionals, managing projects and staff, attending site, writing reports and providing structural design solutions. Excellent communication skills are therefore essential coupled with a passion for delivering the best design solutions possible. In addition to basic salary there is a bonus scheme, 23 days holiday (rising with length of service), free parking and pension scheme. Sam Robson (phone number removed) Aldwych Consulting values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

26 Engineering Jobs in Hastings, UK